Steel Sheet Slitting Machine Line working flow
The steel coil sheet uncoiling leveling slitting recoiling machine line includes in decoiler, guiding device, slitting device, cutting device, length measure device, extension device, re-coiler, hydraulic station and PLC controlling system.
Each parts of main details of Steel Sheet Slitting Machine Line:
A. Hydraulic decoiler
Single cantilever structure bearing capacity 12 Tons.
Support range: 470-530mm.
Mandrel Expansion: hydraulic tension.
Electric unwinding power: 7.5KW frequency conversion.
Hydraulic pump: 4Kw.
B. Shovel head leveling device
Hydraulic shovel head with two shafts.
Total 11rollers (Up: 5 rows, down: 6 rows).
Roller diameter: 110mm.
After the steel coil on the decoiler enters the working position, Cylinder action of the pressure roller device, Roller falling, pressed on a steel strip coil, starter motor, rotating the steel strip on the reel. Shovel head out, steel plate enters the feed roller along the shovel head, passing the pinch of the feed roller and then passing it forward.
C. Slitting part
Slitting rollers
Diameter: 160mm-180mm.
Materials: 40Cr.
Blade tool
Outer diameter: 260-300mm.
Thickness: 10mm.
Number: 5Blades*6pieces
Materials: Cr12MoV.
Matching ruler steel sleeve, can adjust the size. The rubber sleeve is removed to prevent the strip and the board from being damaged.
Hydraulic control change the blades memorial arch.
Main motor power: 15KW speed regulation.
D. Hydraulic cutting machine
Double cylinder diameter: 70mm.
Guide column structure.
E. Waste materials collection
LiJu Motor.
Power: 2.7KW.
2sets.
F. Hydraulic re-decoiler with coil car
With quick adjustment separator tray.
inner diameter: 500-530m.
Max outer diameter: 1600mm.
Load bearing: 12T.
Single cantilever structure hydraulic tension adjustment.Include hydraulic unloading trolley and press arm, power 7.5KW speed regulation.
G.Two sets of hydraulic system and two sets of control system.
Voltage: 380V 50HZ 3Phase or based on customer’s local need.
Steel Sheet Slitting Machine Line Introduction
Our steel coil sheet uncoiling leveling slitting recoiling machine line can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.