Press brake and shearing machine adopt steel welded structure, standard upper and lower molds, vibration to eliminate internal stress, hydraulic transmission system, emergency stop of pedals, high strength and good rigidity.
|
Press brake and shearing machine parameters |
||
|
1 |
Cutting &Hydraulic type |
Double guide pillar |
|
2 |
Hydraulic motor power |
3kw |
|
3 |
Hydraulic Pressure |
10-12MPa |
|
4 |
Voltage |
380V/3phase/50 HZ(or as your requirement) |
|
5 |
Cutting drive |
Decelerating motor+ Chain drive gear all by high-frequency |
|
6 |
Control System |
Panasonic PLC |
|
8 |
Bending degree |
0-90 |
|
9 |
Operating mode |
Button+ Mitsubishi |
|
10 |
Main Frame |
300mm/350mm H-Beam or 350mm |
|
11 |
Backboard Thickness |
17mm |
|
12 |
Feeding Material |
GI/PPGI/PPGL |
|
14 |
Feeding Thickness |
0.2-0.8mm |
|
15 |
Feeding Width |
1-4m |
|
16 |
Effective width |
1-4mm |
|
17 |
Productivity |
0-60times/min |
|
20 |
Roller material |
45# steel |
|
21 |
Cutter material |
Cr12 mould steel heat-treated hardness of HRC = 60-62 degrees |
|
22 |
Brand Square |
A3 35mm thick plate arch |
|
22 |
Cr-Plating Size |
0.05mm |
|
23 |
Overall Size |
4300*1200*2100mm |
|
24 |
Total Weight |
1.8T |
Packaging Details：
1. Machine is covered by plastic film.
2. PLC control box, spare parts and other small parts are packed by wooden carton box.
Service:
a. 18 months guarantee for the whole machine.
b. 24 hours technical support by email or calling
c. If there is any problem found of the machine, we will repair it for free in one year.
