Plc control color steel trapezoidal roof panel machine parameters
| Decoiler/uncoiler | Manual decoiler/ Electric decoiler/ Hydraulic decoiler according to customer requirements |
| Cutting blade | Manual cutter/ Electric cutter/ Hydraulic cutter/ Servo motor cutter according to customer requirements |
| Mainframe | 350mm/ 400mm/ 450mm H beams, 45# steel |
| Middle plate | 16mm/ 18mm/ 20mm/ 22mm or according to machine demands,45# steel |
| Machine cover | Welded by 8mm diameter wire mesh and 35mm diameter angle steel |
| Wheel | 45# steel, surface heat treatment chrome plating, hardness HRC 58-60℃ |
| Shaft | Diameter: 70mm / 75mm / 80mm /85mm /90mm (depends on different design) |
| Solid shaft, high quality 45# forged steel, with anti-return pad | |
| Number of rolls | Common 9 rolls – 25rolls (according to different design) |
| Chain | 1 inch/1.2inch /1.5 inch /2inch according to machine demands |
| Voltage | 220V/50HZ/single phase power; 380V/50HZ/3 phase; 415V/50HZ/3 phase; 440V/50HZ/3 phase; or as requirement |
| Main motor power | 3KW/4kW/5.5KW/7.5KW or as actual demands |
| Hydraulic pump station | Gear pump |
| Pump station motor power | 3KW/4KW/5.5KW/7.5KWor as actual demands |
| Reducer | 6#/ 8# Gear Reducer |
| Hydraulic pressure | 10-12MPa according to the oil pump and pump motor |
| Shearing knife | Cr12 / Cr12MOV, heat treatment, HRC 58-60℃ |
| Cr-plating size: 0.05 mm | |
| Cutting method | Hydraulic guide column cutting; Hydraulic connecting rod cutting; Electric cutting; Servo motor tracking cutting |
| Control System | PLC Control System, 360 degree rotation |
| PLC Display languages | Chinese, English, (Spanish or Russian) |
| Productivity | 8-12m/min; 10~15m/min |
| Length tolerance | ±2mm |
| Cutting tolerance | ±1mm |
| Raw material | Galvanized steel coil/ Galvalume steel coil/ Color steel coil/ Aluminum steel coil/ Stainless steel coil |
| Feeding thickness | 0.3-1.0mm(Galvanized steel coil/ Galvalume steel coil/ Color steel coil/ Stainless steel coil); 0.3-1.5mm (Aluminum steel coil) |
Plc control color steel trapezoidal roof panel machine details
Plc control color steel trapezoidal roof panel machine parts
01. Mainframe: GB H steel, hard texture.
02. Operator station: 360-degree rotation display.
03. Cutter: The main material is Cr12, which has high hardness.
04. Retaining pad: Prevent the nut from loosening.
05. Easy hanging: Prevent the machine from scratching during the movement.
06. Wheel: generally 45# steel, good hardness.
07. Travel switch: Limit the position or travel of the machine.
08. Rear hand knife: cut in advance to prevent waste.
09. Resin wheel: used to record the length of discharge and record data is more accurate.
10. Electric control cabinet: The main motor and PLC are famous brands.
Packaging & Delivery
Packaging Details:
a.The main body of machine with water-proof plastic, then fixed to container by 8mm diameter steel wire and angle iron.
b.Rollers and shafts are covered with anti-rust oil.
c.PLC control system and motor pump are packed with waterproof paper and plastic film.
d.Spare parts in a carton box.
e.Manual decoiler was nude packing.
f.The output-table put into a carton box.
g.If the machine is too long, we will divide it into two parts and pack them in one package with steel wire.
h.Fit for ocean shipping.
Port:
Tianjin, Qingdao, Shanghai, Yiwu port
About us
Tianjin Haixing Imp & Exp Co., Ltd. is a manufacturer and exporter specializing in the design, development and production of cold roll forming machines. The company is located in the northwest of Tianjin, China, and cooperates with a number of production plants and related companies. We have a high-quality professional team, skilled personnel, strong technical force, strong and independent research and development capabilities, advanced production equipment and perfect after-sales service system.
Our customers are all over the world, such as 65 countries in Germany, the United States, Mexico, Chile, Bolivia, Italy, Australia, Kuwait, Saudi Arabia, South Korea, Japan, South Africa, Kenya and other different regions. We have extensive experience in the needs of different countries, such as profile, thickness range, use, installation, etc.
-
Color Steel Glazed Tiles Roof Panel Making Machine
-
762 Corrugated Roof Metal Sheet Roll Forming Ma...
-
5t/7t/10t Auto Hydraulic Decoiler With Car
-
Metal Arch Roofing Sheet Curving Roll Forming M...
-
Standing Seam Metal Roof Panel Machine
-
Automatic CZ interchange purlin machine
-
Light Keel Roll Forming Machine
-
Deck Floor Roof Sheet Roll Forming Machine