Trapezoidal ụlọ Ibé akwụkwọ mere nke trapezoidal ụlọ panel mpịakọta akpụ igwe ka ha dị ike.
|
Ụlọ mpịakọta akpụ igwe parameters |
||
| 1 | Main moto ike | 4kW, 3-adọ ma ọ bụ ka gị na-arịọ |
| 2 | Hydraulic moto ike | 3kW |
| 3 | Hydraulic mgbali | 10-12MPa |
| 4 | voltaji | 380V / 3-adọ / 50Hz (ma ọ bụ dị ka gị chọrọ) |
| 5 | Control usoro | PLC Delta inverter |
| 6 | Mainframe | 300 / 350mm H-doo ma ọ bụ 350mm |
| 7 | Backboard ọkpụrụkpụ | 16mm |
| 8 | Chain size | 1 Inch |
| 9 | nri ihe | agba ígwè coils |
| 10 | nri ọkpụrụkpụ | 0.3-0.8mm |
| 11 | nri obosara | 1000mm |
| 12 | irè obosara | 850mm |
| 13 | Productivity | 0-15 / min |
| 14 | Roll ojii | 13 mpịakọta nzọụkwụ (dị ka dị iche iche imewe) |
| 15 | ala n'obosara | 70mm (na-adabere na dị iche iche imewe) |
| 16 | ala ihe | 45 # ígwè |
| 17 | cutter ihe | Cr12 |
| 18 | ČR-plating size | 0.05mm |
| 19 | n'ozuzu size | 6800 * 1400 * 1150mm |
| 20 | Total ibu | 4.8 tọn |
components:
Manual un-coiler: 1 set
Duzie ikpo okwu: 1 set
Eriri igwe warara leveler: 1 set
Main igwe nke mpịakọta akpụ: 1 set
Electric-moto: 1 set
Ịcha ngwaọrụ: 1 set
Hydraulic ojii: 1 set
PLC akara: 1 set
Supporter table: 1 set
Machine picture ngosi
Packaging nkọwa:
1. igwe kpuchie site plastic film.
2. PLC akara igbe, akụkụ ahụ mapụtara na ndị ọzọ na obere akụkụ na-juru n'ọnụ site osisi katọn igbe.
okwu:
1. nzipu: n'ime ụbọchị 60 mgbe na-anata ego.
2. ngwugwu: mbupụ ọkọlọtọ ngwugwu maka akpa.
3. Ịkwụ Ụgwọ: TT (30% site na TT tupu, 70% site TT mgbe inyocha igwe tupu nnyefe).
