If installation is needed, the seller will dispatch a technician to the buyer’s factory abroad to assist regulating the machine.
Galvanized Sheet Metal Floor Deck Roll Forming Machine parameters
|
Feeding platform |
1 | Frame structure: steel plate welded |
| 2 | roller flatting system and pre-hand cutting system | |
| 3 | Advantage: not scratch the surface of metal plate | |
|
Roll forming M/C |
1 | Machine weight: 13 tons |
| 2 | Installation dimensions: 1500*1800*1500mm | |
| 3 | Machine under frame: steel 400 H-beam | |
| 4 | Sidewall: 45# steel plates | |
| 5 | Roller stations: 28 rows | |
| 6 | Shaft diameter: 85mm | |
| 7 | Side wall plate: 24mm | |
| 8 | Main shaft material: 45# steel with finish turning | |
| 9 | Roller material: 45# forging steel with chromium plate | |
| 10 | Chromium plate thickness: 0.05mm | |
| 11 | Motor power: 15kW*2, brand Siemens | |
| 12 | Reducer type: 2-8# gear speed reducer-Shanghai, China | |
| 13 | Chain wheel and cycle chain: 1.2-inch | |
| 14 | Production line speed: 10-12m/minutes | |
|
PLC control system |
1 |
Functions: adapts quantity cutting system, length of roof sheet can be set on the computer |
| 2 | Tolerance: within 1.0mm | |
| 3 |
Frequency converter: Delta |
|
| 4 |
PLC is Siemens |
|
| 5 |
Encoder: Omron |
|
| 6 |
Touchscreen: Delta |
|
| 7 |
Voltage standard: 3 phases 380V/50Hz or according to customer’s need |
|
| 8 |
Pressing die material: Cr12 |
|
|
Hydraulic pressing device |
1 |
Quenched treatment 58 to 62ºC |
| 2 |
Length tolerance: ±2mm |
|
| 3 |
Pump station motor: 5.5kW, LICHAO, Shanghai |
|
| 4 |
Hydraulic oil: 40# |
|
|
Hydraulic cutting device |
1 |
Functions: adapts electric drive and automatic location system to decide the dimension and cut the target |
| 2 |
Working method: stop to post then post to cut |
|
| 3 |
Cutting mold material: Cr12 |
|
| 4 |
Quenched treatment 58 to 62°C |
|
| 5 |
Length tolerance: ±2mm |
|
| 6 |
Pump station motor: 5.5kW, LICHAO, Shanghai |
Machine photos
Packaging Details:
1. Machine is covered by plastic film.
2. PLC control box, spare parts and other small parts are packed by wooden carton box.
Payment Method
30% as deposit, balance payment after inspection while before delivery.
Production Period
45-50 working days after the 30% deposit.
